Buy Dental Cutters Online in Canada

Fortec Dental Instruments • Pluggers – Double Ended

Double-Ended Dental Pluggers – Dual-Tip Stainless Steel Instruments for Faster, More Flexible Gutta-Percha Compaction

At Fortec International, our Double-Ended Dental Pluggers are manufactured from high-grade, corrosion-resistant stainless steel with two precision-calibrated working tips in a single 21cm instrument — giving clinicians two complementary plugger sizes without switching tools. Whether compacting at the apical, mid-canal, or coronal level, the dual-tip design streamlines the obturation workflow, reduces instrument exchanges, and keeps the filling process efficient and uninterrupted. Available in three size-pair configurations — 1/3, 5/7, and 9/11 — all at $19.99 each — fully autoclavable, CE, ISO 9001, ISO 13485, and FDA certified, and trusted by dental professionals across Canada.

Why Choose Fortec Double-Ended Pluggers

Fortec double-ended pluggers are designed for clinicians who value efficiency and flexibility during root canal obturation. By combining two calibrated plugger sizes in one instrument, the double-ended design eliminates the need to pick up and put down separate tools during compaction — allowing the clinician to move seamlessly between tip sizes for apical and coronal condensation without interrupting the workflow or losing tactile control of the filling material.

Two precision-calibrated working tips per instrument — each end carries a different plugger size, allowing clinicians to access two compaction diameters from a single handle without a tool change during obturation.
Smooth, tapered tip geometry on both ends for accurate vertical compaction of gutta-percha at different canal levels, creating a dense, void-free fill from apex to coronal access.
Balanced 21cm instrument length that provides comfortable reach and steady control in both anterior and posterior access cavities, with the centrally weighted handle distributing tip pressure evenly.
Polished stainless steel construction that prevents gutta-percha adhesion during condensation, allowing clean insertion and withdrawal at both ends without disturbing the compacted fill.
Fully autoclavable for safe, long-term clinical reuse — maintains tip calibration and surface integrity through repeated high-temperature sterilization cycles without corrosion or dimensional change.

Three Size-Pair Configurations – 1/3, 5/7 & 9/11

Our Double-Ended Pluggers collection offers 3 in-stock configurations at $19.99 each, all in a uniform 21cm working length. The 1/3 Plugger pairs the two smallest tip sizes for fine apical compaction in narrow canals. The 5/7 Plugger covers the mid-range sizes used most frequently across standard canal anatomies. The 9/11 Plugger pairs the two largest tip sizes for broad coronal and mid-canal condensation in posterior and wide-diameter canals — together, the three instruments cover the full compaction range from apex to access cavity opening.

Every double-ended plugger is individually inspected for tip diameter accuracy on both ends, handle balance, and surface finish quality before leaving our facility — backed by Fortec's full warranty against defects in material and workmanship, and sterilization-safe through standard steam autoclave cycles without loss of tip geometry or handle integrity.

CE Certified ISO 9001:2015 ISO 13485 Autoclavable FDA Compliant

Cover the Full Compaction Range with Three Double-Ended Instruments

Whether you are building a new obturation tray or streamlining an existing endodontic setup, choose Fortec Double-Ended Dental Pluggers — dual-tip, precisely calibrated, and available in 1/3, 5/7, and 9/11 size pairs to cover every canal level from apex to access opening. Pair with Fortec single-ended pluggers, spreaders, and heat carriers for a complete, high-performance obturation system trusted by dental professionals across Canada.

View Double-Ended Pluggers Collection

FAQ – Dental Cutters | Fortec Canada

Frequently Asked Questions

Everything you need to know about Fortec's dental cutters — models, materials, usage, pricing, and care.

01 What dental cutters does Fortec carry and how many models are available?

Fortec currently carries 9 dental cutter models in its Orthodontics collection: the Hard Wire Cutter, Flush Cut Distal End Cutter, Mini Pin & Ligature Cutter, Multi-Use Cutter, Bird Beak Pliers with Cutter, 15° Hard Wire Cutter, Micro Cutter, Universal Cut & Hold Distal End Cutter, and Universal Cut & Hold Distal End Cutter with Long Handle. All are crafted from high-quality stainless steel and most are currently in stock.

02 What material are Fortec dental cutters made from?

All Fortec cutters are manufactured from premium-grade, heat-treated stainless steel sourced from quality-controlled suppliers. This gives every cutting instrument exceptional edge retention, corrosion resistance, and structural strength — even after repeated autoclaving. The blades are precision-ground to maintain sharpness through extended clinical use, and each instrument is individually inspected before leaving the facility to ensure consistent cutting performance and jaw alignment.

03 What is the difference between the Hard Wire Cutter and the 15° Hard Wire Cutter?

The Hard Wire Cutter ($90.99) features a straight-jaw design for cutting heavy-gauge stainless steel archwires and hard orthodontic wires with direct, head-on access. The 15° Hard Wire Cutter ($104.99) has its blades angled at 15 degrees, which improves access in the posterior region and allows the clinician to position the cutting edges more precisely against the wire without the handle obstructing the line of sight. If you frequently work in tight spaces or posterior segments, the angled version offers a significant ergonomic advantage over the standard model.

04 What makes the Flush Cut Distal End Cutter different from a standard wire cutter?

The Flush Cut Distal End Cutter ($104.99) is specifically designed to trim archwire ends flush to the last bracket or tube without leaving a sharp protruding wire end that could irritate soft tissue. Its slim, offset beak reaches distal to the last molar band and cuts the wire as close to the bracket as possible — producing a clean, smooth finish. A standard wire cutter typically leaves a longer tail and is not designed for flush-to-bracket distal trimming. This makes the Flush Cut model the preferred choice for final archwire seating and patient comfort finishing.

05 When should I use the Universal Cut & Hold Distal End Cutter versus the Long Handle version?

Both the Universal Cut & Hold Distal End Cutter ($104.99) and the Long Handle version ($104.99) feature a built-in wire-holding mechanism that captures the cut wire end and prevents it from falling into the patient's mouth — a key safety feature during distal end trimming. The standard version suits most clinical setups and patient anatomies. The Long Handle version is designed for clinicians who prefer a longer grip during extended procedures or need additional reach for larger patients and deeper posterior access. Both are priced equally and offer the same cutting and holding performance.

06 What is the Mini Pin & Ligature Cutter used for in orthodontics?

The Mini Pin & Ligature Cutter ($104.99) is designed for cutting thin ligature wires and small-diameter pins that secure brackets and orthodontic appliances. Its compact, fine-tip beak allows the clinician to access tight spaces between brackets without disturbing adjacent ties or soft tissue. This makes it the go-to instrument for ligature removal during archwire changes and for trimming small wire components in fixed appliance therapy. The mini size also reduces bulk in the mouth, improving patient comfort during the procedure.

07 What is the Micro Cutter best suited for compared to other cutters in the range?

The Micro Cutter ($104.99) is engineered for cutting very fine-gauge wires and delicate orthodontic components where precision is more important than cutting force. Its narrow, fine-tipped blades allow accurate placement on thin wires without applying lateral pressure that could distort surrounding appliance components. It is the preferred choice for light wire techniques, nickel-titanium archwires, and situations where the clinician needs to cut close to a bracket without risk of slippage. For heavy stainless steel wires, the Hard Wire Cutter or Multi-Use Cutter is more appropriate.

08 Are Fortec cutters autoclave-compatible and reusable?

Yes. All Fortec cutters are fully compatible with standard steam autoclave sterilization and are built for long-term clinical reuse. The heat-treated stainless steel construction maintains blade sharpness, hinge action, and jaw alignment through repeated sterilization cycles without corrosion, pitting, or dimensional change. To maximise lifespan, Fortec recommends rinsing instruments immediately after use, applying a small amount of instrument lubricant to the hinge joint periodically, and following the full care protocols outlined in Fortec's Instruments Care and Maintenance Care guides.

09 What certifications do Fortec cutters hold and what quality standards do they meet?

Fortec cutters are certified to four major quality and regulatory standards: CE Certified (European conformity for medical devices), ISO 9001 (quality management systems), ISO 13485 (medical device quality management), and FDA Compliant (U.S. Food and Drug Administration). These certifications confirm that every cutter is manufactured under a controlled, audited process and meets strict safety, hygiene, and performance requirements for dental and orthodontic clinical use across Canada, the United States, and internationally.

10 What are the prices for Fortec cutters and does Fortec offer free shipping across Canada?

Fortec cutter pricing is straightforward across the range: the Hard Wire Cutter is priced at $90.99, making it the most accessible entry point in the collection. All other models — including the Flush Cut Distal End Cutter, Mini Pin & Ligature Cutter, Multi-Use Cutter, Bird Beak Pliers with Cutter, 15° Hard Wire Cutter, Micro Cutter, Universal Cut & Hold Distal End Cutter, and the Long Handle version — are each priced at $104.99. Fortec offers free Canada-wide shipping on all orders over $195 before taxes, shipping from their Mississauga, Ontario warehouse directly to dental clinics and students across the country. Full details are available on the Shipping Policy page.

Filter by

9 products

Sort by:

Hard Wire Cutter

Hard Wire Cutter

Flush Cut Distal End Cutter

Flush Cut Distal End Cutter

Universal Cut & Hold Distal End Cutter with Long Handle

Universal Cut & Hold Distal End Cutter with Long Handle

Mini Pin & Ligature Cutter

Mini Pin & Ligature Cutter

Multi-Use Cutter

Multi-Use Cutter

Bird Beak Pliers with Cutter

Bird Beak Pliers with Cutter

15° Hard Wire Cutter

15° Hard Wire Cutter

Micro Cutter

Micro Cutter

Universal Cut & Hold Distal End Cutter

Universal Cut & Hold Distal End Cutter

Double-Ended Dental Pluggers – Dual-Tip Stainless Steel Instruments for Faster, More Flexible Gutta-Percha Compaction

Why Choose Fortec Double-Ended Pluggers

Cover the Full Compaction Range with Three Double-Ended Instruments

Frequently Asked Questions

Filter and sort

Filter

9 products

Sort by:

Why Choose Fortec Double-Ended Pluggers

Cover the Full Compaction Range with Three Double-Ended Instruments

Frequently Asked Questions

My Wishlist

Compare